OPENTEC FW75

Capacity/Panel: 75 kg
Panel thickness: 30 to 50 mm
Panel width: 400 to 1000 mm
Max opening dimensions: 12 x 4 m (6+6 panels)
Track: Aluminium
Movement: Folding

Folding system for wood panels. For panels of 30 to 50 mm thinckness. For inside use: restaurants, hotels, patios, bars, shopping centres, etc...

Easy to use: the partitions slide easily
Easy to install: convenient access to adjustment modules
Robust materials: anodised aluminium and stainless steel
Hangers equipped with nylon rollers for silent operation
High quality concealed hinges for a clean, sober look
3 panels min.

Anodised aluminium track – 3 m

Ref: 10400A/300

Anodised aluminium drilled track, 51.5 x 47.5 mm cross-section. Length = 3 m.

View product
Anodised aluminium track – 6 m

Ref: 10400A/600

Anodised aluminium drilled track, 51.5 x 47.5 mm cross-section. Length = 6 m.

View product
Angle bracket set

Ref: GH10430B

Set of 4 anodised aluminium angle brackets for mounting tracks on walls, 10400A.

View product
Produit

Ref: GC6100

View product

Set of end caps

Ref: GH10430EN

Set of black raw plastic end caps for pelmets (GH10430P). End caps can be painted on request in your choice of RAL colour.

View product
Set of pelmet mounts

Ref: GH10430BP

Set of 4 black plastic pelmet brackets (GH10430P). Fastened to track 10400A if track is wall-mounted.

View product
Aluminium pelmet – 6 m

Ref: GH10430P

Clip-on raw aluminium pelmet. For track 10400A. Used for wall mounting - Height = 78.5 mm - Length = 6 m. Pelmets can be painted on request in your choice of RAL colour.

View product
Aluminium pelmet – 3 m

Ref: GH10430P/3

Clip-on raw aluminium pelmet. For track 10400A. Used for wall mounting - Height = 78.5 mm - Length = 3 m. Pelmets can be painted on request in your choice of RAL colour.

View product

Hanger

Ref: 9542NC2

Hanger with stainless steel reinforcement, equipped with 4 nylon-coated rollers mounted on ball bearings. Pin Ø = M10

View product

Concealed hinge for heavy duty use

Ref: 1575
Invisible" concealed hinge. The hinge is hidden inside the panel and does not protrude from its plane. Reinforced version (for intensive consumer use).
- 3D adjustment: depth (X): ± 1 mm / vertical (Z): ± 2 mm / horizontal (Y): ± 1mm
View product
Hinge

Ref: 1510CXA2

Stainless steel hinge (XA2), centred, fastened on edge. Pin Ø = 10 mm.

View product
Drilling template

Ref: 1575G

Drilling template for 1540 and 1575 hinges.

Supplied with 4 interchangeable plates to machine different depths.

View product

U-profile – 2 m

Ref: 1110/200

Galvanized U profile 30 x 30 mm - 2 m length.

View product
U-profile – L = 3 m

Ref: 1110/300
- Galvanized U profile 30 x 30 mm - 3 m length
View product
U-profile – 4 m

Ref: 1110/400

Galvanized U profile 30 x 30 mm - 4 m length.

View product
U-profile – 5 m

Ref: 1110/500

Galvanized U profile 30 x 30 mm - 5 m length.

View product
U-profile – L = 6 m

Ref: 1110/600
- Galvanized U profile 30 x 30 mm - 6 m length
View product
Jointing bracket

Ref: 1110M
- Jointing bracket for U profile 30 x 30
View product

Brush seal

Ref: GH10XL

Brush seal under panels. Sold by the metre. Height = 10 mm

View product

Set of upper and lower pivots

Ref: 1101PFHB

Set of upper and lower pivots with integrated stop. Mounted on the first panel.

View product
Stainless steel plate

Ref: 0036FXA2

XA2 stainless steel plate, fastened on edge, with threaded M10 hole and XA2 stainless steel M10 hex nut. Length = 135 mm - width = 20 mm. For panels over 20 mm thick.

View product
Stainless steel angle bracket

Ref: 9144

XA2 stainless steel angle bracket with stop. Enables panels to be correctly positioned in the closed position. Screwed on every two panels.

View product
Drilling jig for hinges

Ref: GH10430GP-3

Drilling jig for 1510CXA2 hinges.

View product
Magnet kit

Ref: GHLK-01

Screw-type male/female magnet kit Enables doors to be held in the open position. Thickness = 26 mm. Ø = 30 mm. RAL 7016.

View product
Pivot kit

Ref: 1102PFHB

Kit of upper and lower pivots for track 10400.

View product
Clip-in kit

Ref: 9142

Clip-in kit for a panel weighing under 50 kg. Enables panels to be held in the closed position.

View product
Clip-in kit

Ref: 9143

Clip-in kit for a panel weighing over 50 kg. Enables panels to be held in the closed position.

View product