Search results: “”
Sort results by:
Results per page
- - -
  • Hinge

    Hinge

    Ref: 1514P

    Adjustable galvanized steel hinge, 3 mm. Dimensions: 120 X 100 mm. Steel pin, 14 mm in diameter. Face-mounted. 

  • Track - 2 m

    Track – 2 m

    Ref: 9010/200

    HERCULE track in galvanised steel. Length = 2 m.

  • Tube holder kit

    Tube holder kit

    Ref: 99402T

    Tube holder kit for trolleys. For tracks 2525, 3530, 5040, 6255 and 8570. 

  • Tube holder kit

    Tube holder kit

    Ref: 9402T

    Tube holder kit for cable carriers in plain steel. For tracks 2525, 3530, 5040, 6255 and 8570. 

  • Sensor

    Sensor

    Ref: C0001300

    Motion sensor radar.

  • End stop

    End stop

    Ref: GF6001

    End stop to be fastened into the ground to close the door. Left-side. For 8, 10 and 12 mm doors.

  • End stop

    End stop

    Ref: GF6000

    End stop to be fastened into the ground to close the door. Right-side. For 8, 10 and 12 mm doors.

  • Gear

    Gear

    Ref: 9050GPAF

    Special gear for 4-metre-long steel cantilever sliding gates weighing 400 kg.

    Gear includes:

    • 2 standard cantilever hangers 9952PAF;
    • 2 end brackets 1051G;
    • 2 lead-in guides 1050E;
    • 2 adjustable guides 1062.
  • Set for two panels - 2 m

    Set for two panels – 2 m

    Ref: PICO26-200T

    Set includes:

    • 4 screw-in tracks 25V/200M, 2 m long;
    • 2 sets of gear PICO26;
    • screws and installation instructions.

    Sets packaged in a PET tube. Ideal for self-service display.

  • Handle

    Handle

    Ref: GHL01/GR

    Retractable anthracite grey (RAL 7016) handle. Height = 155 mm.

  • Finishing ring

    Finishing ring

    Ref: C0000545

    10-mm-thick, black anodised aluminium finishing ring – to be fixed on the motor box if used for façade-mounted shutters.

  • Set - 1.95 m track

    Set – 1.95 m track

    Ref: TANGO40-195

    Set for 4 panels, includes:

    • 1 x 1.95 m anodised aluminium track (SAF);
    • 2 SAF hangers (smooth pin with ball bearings) with plate;
    • 2 upper pivots;
    • 2 lower pivots;
    • 6 hinges 1504C3;
    • screws, spanner and installation instructions.
  • Drive kit

    Drive kit

    Ref: W0002630

    Drive kit (230V power supply) with radio control, includes:

    • 1 SYCOMM motor (on-board electronics), without a position-holding brake;
    • 1 battery pack (ideal in case of power outage), 2-year warranty;
    • 1 cable harness to connect the motor to the battery;
    • 1 radio remote control C0004770.
  • Drive kit

    Drive kit

    Ref: W0002600

    Drive kit (230V power supply) with radio control, includes: 

    • 1 SYCOMM motor (on-board electronics) without a position-holding brake;
    • 1 wired switch C0001050.
  • Extension

    Extension

    Ref: C0012630

    2.5-metre harness extension for automatic keepers.

  • Cable harness for battery back - 2.2 m

    Cable harness for battery back – 2.2 m

    Ref: C0012620

    2.2-metre cable harness extension for motor/battery. 2 extensions can be added to the standard kit for a total length of 6.6m.

  • Keeper

    Keeper

    Ref: 1317G

    Keeper for slide bolts 1317A, 1326A and 1351A.

  • Locking kit

    Locking kit

    Ref: 1310BR

    Locking system to hold a sliding shutter/shade screen in any position. Simply pull and hold the cable to release the shutter/screen. Then release the cable to hold the shutter/screen in place again. Stainless steel 2-metre-long sheathed cable.

  • Track - 3 m

    Track – 3 m

    Ref: 2525F/300

    Galvanised steel track, 27 x 24.5 mm, thickness = 1.5 mm, drilled and countersunk every 110 mm. Length = 3 m.

  • Track - 2 m

    Track – 2 m

    Ref: 2525F/200

    Galvanised steel track, 27 x 24.5 mm, thickness = 1.5 mm, drilled and countersunk every 110 mm. Length = 2 m.

  • Curve sector

    Curve sector

    Ref: 3530CS

    Curve sectors for 3530 track.

  • Tubular seal - 2.5 m

    Tubular seal – 2.5 m

    Ref: 66JC5/250

    Tubular seal, 5 mm in diameter, made of silicone with a pine base. For 5 x 2 mm groove. Length = 2.5 m.

  • Tubular seal - 10 m

    Tubular seal – 10 m

    Ref: 66JC5/10

    Tubular seal, 5 mm in diameter, made of silicone with a pine base. For 5 x 2 mm groove. Length = 10 m.

  • Track

    Track

    Ref: 3530CB

    Galvanized lower curve - track 35x30 R=500 mm.

Results per page
- - -