System for motorizing swinging shutters WIBAT-APPLIQUE

Set of 2 motors with wireless remote control including:

• 1 right motor;
• 1 left motor;
• 1 remote control with 4 buttons C0004770;
• 1 drilling jig + fastening screws;
• Installation instructions.

Set of 2 motors with wired remote control including:

• 1 right motor;
• 1 left motor;
• 1 remote control C0001050;
• 1 drilling jig + fastening screws;
• Installation instructions.

Set of 1 left motor with wireless remote control including:

• 1 left motor;
• 1 remote control with 4 buttons C0004770;
• 1 drilling jig + fastening screws;
• Installation instructions.

Set of 1 left motor with wired remote control including:

• 1 left motor;
• 1 remote control C0001050;
• 1 drilling jig + fastening screws;
• Installation instructions.

Set of 1 left motor with wireless remote control including:

• 1 right motor;
• 1 remote control with 4 buttons C0004770;
• 1 drilling jig + fastening screws;
• Installation instructions.

Set of 1 left motor with wired remote control including:

• 1 right motor;
• 1 remote control C0001050;
• 1 drilling jig + fastening screws;
• Installation instructions.

Wired switch with 2 push-buttons.

• Radio-controlled programmable "push push" timer to schedule opening and closing of shutters: 4 groups possible

Repeater to double the range, programmable via control + holder.

4-channel programmable 433,92 MHz remote control + holder.

The radio receiver allows you to change a wired control into a wireless control compatible with all our transmitters.
Fits onto all types of 230 V motors and can be integrated in a junction box. Range: 20 m – Dimensions: 44 x 44 x 25 mm

Electromagnetic closure (24 V DC):
- Keeps shutter closed during strong winds (≥ 12 daN per point)
- Effective deterrent against intrusions
Complete set for 1 pair of shutters

Electromagnetic closure (24 V DC):
- Keeps shutter closed during strong winds (≥ 12 daN per point)
- Effective deterrent against intrusions
Complete set for 2 electromagnetic closures (top and bottom)

Stainless steel link for multiple panels to drag shutters along when motorizing swinging shutters. Min. and max. width of panels: min. = 400 mm, max. = 650 mm.

Electromechanical closure (24 V DC – cable length: 3 m) cable exits on side, bolt on left side for swinging shutter. Holding force: 80 daN.

Electromechanical closure (24 V DC – cable length: 3 m) cable exits on side, bolt on right side for swinging shutter. Holding force: 80 daN.

Electromechanical closure (24 V DC – cable length: 3 m) with vertical cable exit, bolt on right side for swinging shutter. Holding force: 80 daN.

Electromechanical closure (24 V DC – cable length: 3 m) with vertical cable exit, bolt on left side for swinging shutter. Holding force: 80 daN.