TANGO | Mantion

Capacity/Pannel: 40 kg
Track: Aluminium (SAF)
Movement: Folding/Sliding

Sliding-Folding system for partition doors and wardrobe doors.

FLEXIBLE: for 2 or 4 pannels
DESIGN: no bottom track and minimum gaps
PRACTICAL: easy to install and to operate

EPD

* Number of cycles

* Fabrication

25 years guarantee

TANGO - Image 1

TANGO - Image 2

TANGO - Image 3

TANGO - Image 4

TANGO - Image 1

TANGO - Image 2

TANGO - Image 3

TANGO - Image 4

Set – Track 1.20 m

Ref: TANGO40-120

Set for 2 panels including : 1 aluminium track of 1.20 m (SAF), 1 SAF hanger (ball bearings) with plate, 1 upper pivot, 1 lower pivot, 3 hinges 1504C3, screws and mounting instructions.

View product
Set – Track 1.50 m

Ref: TANGO40-150
Set for 2 panels including:
- 1 aluminium track of 1.50 m (SAF);
- 1 SAF hanger (ball bearings) with plate;
- 1 upper pivot;
- 1 lower pivot;
- 3 hinges 1504C3;
- Screws and mounting instructions.
View product
Set – Track 2 m

Ref: TANGO40-200

Set for 4 panels including :
- 1 aluminium track of 2 m (SAF)
- 2 SAF hangers (ball bearings) with plate
- 2 upper pivots
- 2 lower pivots
- 6 hinges 1504C3
- Screws and mounting instructions.

View product
Set – Track 3 m

Ref: TANGO40-300

Set for 4 panels including :
- 1 aluminium track of 3 m (SAF)
- 2 SAF hangers (ball bearings) with plate
- 2 upper pivots
- 2 lower pivots
- 6 hinges 1504C3
- Screws and mounting instructions.

View product
Set – 1.95 m track

Ref: TANGO40-195
Set for 4 panels, includes:
- 1 x 1.95 m anodised aluminium track (SAF);
- 2 SAF hangers (smooth pin with ball bearings) with plate;
- 2 upper pivots;
- 2 lower pivots;
- 6 hinges 1504C3;
- screws, spanner and installation instructions.
View product

Rail aluminium SAF – 1,55 m

Ref: 11108/155

Rail aluminium SAF80. Longueur de 1,55 m.

View product
Rail aluminium SAF – 1,95 m

Ref: 11108/195

Rail aluminium SAF80. Longueur de 1,95 m.

View product
Track – 2 m

Ref: 11108/200
- Anodized aluminium track, 33 x 27 mm cross-section drilled every 0.44 m. Length = 2 m
View product

Gear

Ref: TANGO42

Gear to guide 2 panels. Suitable for TANGO40-120 and TANGO40-150 to add 2 panels on a 4 panels installation (2+2).

View product

Hinge

Ref: 1504PI
- Special hinge with ball bearings. The benefits: - Holds the panels in the closed position - Closes the gap between the panels. This special hinge is an alternative to the hinges 1504C3 (3 hinges are required for 2 panels installations and 6 for 4 panels installations).
View product
“Invisible” flush-mounted hinge

Ref: 1540
“Invisible” flush-mounted hinge. The hinge is concealed inside the panel and is flush with the surface.

Advantages:
- 3D adjustment: depth (X): ± 2 mm / vertical (Z): ± 2.5 mm / horizontal (Y): ±1 mm
- Reversible hinge
- Width 23 mm
View product

Angle plate

Ref: 11013
- Angled (sliding) bracket for wall mounting of tracks 11108 and 11312. Fastened every 0.44 m (Track 11108) and fastened every 0.30 m (Track 11312).
View product