SAFGLASS PINCE 120

SAFGLASS PINCE 120

Capacity/Door: 120 kg
Door thickness: 12 - 15 mm
Track: Aluminium
Movement: Straight

Straight sliding Systems for glass doors of 12 or 15 mm thickness, combining refined design with smooth rolling.

  • Thanks to the clamp, there is no need to drill the glass in any way.
  • Confortable: the damper closer system M66 for gentle closing of doors (automatically follows door to its closed position over 100 mm); and hydraulic closer stop allows doors to open softly.
  • Practical: the clamp can be mounted with or without pelmet (no drilling on the visible side).
  • Clever: Rollers equipped with a ball joint that improves the robustness of the system and adjusts to any mounting location defects.
* Number of cycles* Fabrication
SAFGLASS PINCE 120 - Image 1 SAFGLASS PINCE 120 - Image 2 SAFGLASS PINCE 120 - Image 3

Choose your Tracks

4 product(s)
  • Track - 2 m

    Track – 2 m

    Ref: 11312/200
    • Anodized aluminium track, 37.4 x 28 mm cross-section drilled every 0.30 m, length = 2 m
  • Track - 3 m

    Track – 3 m

    Ref: 11312/300
    • Anodized aluminium track, 37.4 x 28 mm cross-section drilled every 0.30 m, length = 3 m
  • Track - 5 m

    Track – 5 m

    Ref: 11312/500
    • Anodized aluminium track, 37.4 x 28 mm cross-section drilled every 0.30 m, length = 5 m
  • Track - 6 m

    Track – 6 m

    Ref: 11312/600
    • Anodized aluminium track, 37.4 x 28 mm cross-section drilled every 0.30 m, length = 6 m

Choose your Kit

2 product(s)
  • Gear SAFGLASS PINCE 120

    Gear SAFGLASS PINCE 120

    Ref: GA4204
    • Gear for one 12 mm door including: - 2 rollers with precision bearings + installation template (STAINLESS screws, bolts and bearings) - 2 anodised aluminium clamps - 2 claw stops - 1 stainless steel lower guide - Installation instructions
  • Gear SAFGLASS PINCE 120

    Gear SAFGLASS PINCE 120

    Ref: GA4205
    • Gear for one 15 mm door including: - 2 rollers with precision bearings + installation template (STAINLESS screws, bolts and bearings) - 2 anodised aluminium clamps - 2 claw stops - 1 grey nylon lower guide - Installation instructions

Choose your Pelmets and end caps

9 product(s)
  • Pelmet - 2 m

    Pelmet – 2 m

    Ref: 11031/200
    • Anodized aluminium pelmet (available in RAL colours upon request) to be snapped onto track 11312. To be used for ceiling mounting. Height = 67 mm - Length = 2 m
  • Pelmet - 3 m

    Pelmet – 3 m

    Ref: 11031/300
    • Anodized aluminium pelmet (available in RAL colours upon request) to be snapped onto track 11312. To be used for ceiling mounting. Height = 67 mm - Length = 2 m
  • Pelmet - 2 m

    Pelmet – 2 m

    Ref: 11041/200
    • Snap-on anodised aluminium pelmet*. To be used for wall mounting. Height = 86 mm – Length = 2 m.* Coverings are made of anodised aluminium. They are available on request painted in your choice of RAL colour
  • Pelmet - 3 m

    Pelmet – 3 m

    Ref: 11041/300
    • Snap-on anodised aluminium pelmet*. To be used for wall mounting. Height = 86 mm – Length = 3 m.* Coverings are made of anodised aluminium. They are available on request painted in your choice of RAL colour
  • Pelmet - 4 m

    Pelmet – 4 m

    Ref: 11041/400
    • Snap-on anodised aluminium pelmet*. To be used for wall mounting. Height = 86 mm – Length = 4 m.* Coverings are made of anodised aluminium. They are available on request painted in your choice of RAL colour
  • Pelmet - 6 m

    Pelmet – 6 m

    Ref: 11041/600
    • Snap-on anodised aluminium pelmet*. To be used for wall mounting. Height = 86 mm – Length = 6 m.* Coverings are made of anodised aluminium. They are available on request painted in your choice of RAL colour
  • Raw aluminum pelmet - 2 m

    Raw aluminum pelmet – 2 m

    Ref: 11041B/200

    Raw aluminium pelmet to be snapped onto tracks 11108 and 11312. To be used for wall mounting. Height = 86 mm - Length = 2 m.

  • Raw aluminum pelmet - 4 m

    Raw aluminum pelmet – 4 m

    Ref: 11041B/400

    Raw aluminium pelmet to be snapped onto tracks 11108 and 11312. To be used for wall mounting. Height = 86 mm - Length = 4 m.

  • End caps

    End caps

    Ref: 11045B

    Set of end caps in raw aluminium for pelmet 11041.

Choose your Clamp covering

2 product(s)
  • Clamp covering - 12 mm

    Clamp covering – 12 mm

    Ref: GA4120
    • CLAMP COVERING*(only covers clamp) Aluminium covering for 12 mm clamp consisting of 4 clamp pelmets and 4 end pieces - Length of clamp pelmets = 194 mm - * Coverings are made of anodised aluminium. They are available in raw aluminium (to be painted) or painted on request in your choice of RAL colour.
  • Clamp covering - 15 mm

    Clamp covering – 15 mm

    Ref: GA4420
    • CLAMP COVERING* (only covers clamp) Aluminium covering for 15 mm clamp consisting of 4 clamp pelmets and 4 end pieces - Length of clamp pelmets = 194 mm * Coverings are made of anodised aluminium. They are available on request painted in your choice of RAL colour

Choose your Long clamp covering

4 product(s)
  • Clamp covering - 12 mm

    Clamp covering – 12 mm

    Ref: GA4121
    • LONG CLAMP COVERING*(covers entire width of door) Aluminium covering for 12 mm clamp consisting of 2 clamp pelmets and 2 end pieces. Length of clamp pelmets = 1.5 m (cut to length)
  • Clamp covering - 12 mm

    Clamp covering – 12 mm

    Ref: GA4123
    • LONG CLAMP COVERING*(covers entire width of door) Aluminium covering for 12 mm clamp consisting of 2 clamp pelmets and 2 end pieces - Length of clamp pelmets = 3 m (cut to length) * Coverings are made of anodised aluminium. They are available in raw aluminium (to be painted) or painted on request in your choice of RAL colour
  • Long clamp covering - 15 mm

    Long clamp covering – 15 mm

    Ref: GA4421
    • LONG CLAMP COVERING* (covers entire width of door) Aluminium covering for 15 mm clamp consisting of 2 clamp pelmets and 2 end pieces. Length of clamp pelmets = 1.5 m (cut to length) * Coverings are made of anodised aluminium. They are available on request painted in your choice of RAL colour
  • Long clamp covering - 15 mm

    Long clamp covering – 15 mm

    Ref: GA4423
    • LONG CLAMP COVERING* (covers entire width of door) / Aluminium covering for 15 mm clamp consisting of 2 clamp pelmets and 2 end pieces / Length of clamp pelmets = 3 m (cut to length)

Choose your Accessories

1 product(s)
  • Angle plate

    Angle plate

    Ref: 11013
    • Angled (sliding) bracket for wall mounting of tracks 11108 and 11312. Fastened every 0.44 m (Track 11108) and fastened every 0.30 m (Track 11312).
Are you sure you want to remove this item from your basket?