SAF-TWIN

SAF-TWIN

Capacity/door : 80 kg
Track : Aluminium
Movement : Straight

A double straight sliding system for cupboards with 2 or 3 door panels weighing up to 80 kg each and with a maximum thickness of :

- 35 mm for track 11108D35

- 45 mm for track 11108D45

 

  • SILENT : The result of many hours of design and testing, our new rollers ensure doors slide softer than ever.
  • INGENIOUS : Rollers equipped with a ball joint that improves the robustness of the system and adjusts to any mounting location defects.
  • PRACTICAL : Quick and easy to install thanks to the double track.
EPD* Number of cycles* Fabrication25 years guarantee
SAF-TWIN - Image 1 SAF-TWIN - Image 2 SAF-TWIN - Image 3 SAF-TWIN - Image 4

Choose your Double tracks

4 product(s)

Choose your Kit

1 product(s)
  • Gear for 1 panel

    Gear for 1 panel

    Ref: SAF80A-7

    Gear for one panel, includes :

    • 2 rollers SAF81A (stainless steel pins mounted on ball bearings),
    • 2 plates 10036,
    • 2 stops 11213,
    • 1 lower guide 1124,
    • Tools and installation instructions 

Choose your Damper closer

2 product(s)
  • Damper closer

    Damper closer

    Ref: M66S

    Buffer damper system for softly opening and/or closing doors (over 100 mm).
    The damper automatically accompanies the door to its open and/or closed position. Suitable for doors weighing 21-60 kg. It is recommended that 2 dampers be used for doors with a width of 830 mm or more

  • Damper closer

    Damper closer

    Ref: M67S

    Buffer damper system for softly opening and/or closing doors (over 100 mm).
    The damper automatically accompanies the door to its open and/or closed position. Suitable for doors weighing 61-80 kg. It is recommended that 2 dampers be used for doors with a width of 870 mm or more.

Choose your Bottom guide

1 product(s)
  • Guide

    Guide

    Ref: 1103R
    • Polyamide guide - Screwing type for channel of 6x18 mm

Choose your Accessories

1 product(s)
  • Plate

    Plate

    Ref: 11036

    Plate for side-mounted doors. L = 127 mm. Can be installed flush to obtain the smallest gap between the track and door (min. gap of 11 mm required).

Are you sure you want to remove this item from your basket?