Our hinges

• Adjustable hinge - Side fixing 50 x 200 mm, axle Ø 8

• Hinge, welding type Height : 80 mm - Ø 10 mm axle

• Hinge, welding type Height : 85 mm - Ø 12 mm axle

• Hinge, welding type Height : 120 mm - Ø 14 mm axle

• Welding hinge, Height : 120, axle Ø 16

• Hinge in 25/10e, screwing type, wall fixing - 50 x 200 mm - axle Ø 10 mm.

Hinge in 12/10e, wall fixing - 70 x 40 mm - axle Ø 4 mm

Invisible" concealed hinge. The hinge is hidden inside the panel and does not protrude from its plane. Reinforced version (for intensive consumer use).

• 3D adjustment: depth (X): ± 1 mm / vertical (Z): ± 2 mm / horizontal (Y): ± 1mm

• Hinge 120 x 100, with a Ø 14 axle, top-fixing

• Hinge 120 x 100, with a Ø 16 axle, top-fixing

• Hinge in 18/10e, screwing type, soffit fixing - 80 x 60 mm - axle Ø 10 mm.

• Screwing hinge 85 x 85, with a Ø 12 axle, top-fixing, for woods of 35 mm thick

• Side-fixing hinge 85 x 60 mm, riveting or screwing type

Stainless steel hinge (XA2), centred, fastened on edge. Pin Ø = 10 mm.

Stainless steel hinge (XA2), offset, fastened on edge (with handle). Pin Ø = 10 mm.

Stainless steel hinge (XA2), offset, fastened on edge. Pin Ø = 10 mm.

• Top-fixing hinge 120 x 100 mm, spindle Ø 16 mm

• Adjustable hinge - Side fixing 50 x 65 mm, axle Ø 8

• Top-fixing hinge 85 x 85 mm, spindle Ø 12 mm

• Hinge in 20/10e, wall fixing - 50 x 65 mm - axle Ø 8 mm

• Hinge in 18/10e, wall fixing - 80 x 60 mm - axle Ø 10 mm.

Drilling template for 1540 and 1575 hinges.

Supplied with 4 interchangeable plates to machine different depths.

Set of 3 stainless steel hinges (XA2), centred, fastened on edge. Pin Ø = 10 mm.

Set of 3 stainless steel hinges (XA2), offset, fastened on edge. Pin Ø = 10 mm.

Set of 3 stainless steel hinges (XA2), offset, fastened on edge (with handle). Pin Ø = 10 mm.

• Special hinge with ball bearings. The benefits: - Holds the panels in the closed position - Closes the gap between the panels. This special hinge is an alternative to the hinges 1504C3 (3 hinges are required for 2 panels installations and 6 for 4 panels installations). 

Adjustable polished stainless steel hinge, 2 mm. Dimensions: 65 X 62 mm. Stainless steel pin, 8 mm in diameter. Face-mounted. 

Adjustable galvanized steel hinge, 2 mm. Dimensions: 40 X (47 + 30) mm. Steel pin, 6 mm in diameter. Face-mounted. 

Adjustable galvanized steel hinge, 3 mm. Dimensions: 120 X 100 mm. Steel pin, 14 mm in diameter. Face-mounted.