| Mantion

EPD

* Number of cycles

* Fabrication

25 years guarantee

Produit

Ref: MA80B-165

View product
Produit

Ref: MA80B-190

View product
Produit

Ref: MA80B-240

View product

U-profile

Ref: 1106/110

Black PVC U-profile, 12x17, to be flush-mounted under the door. Improves door sliding performance. Suitable for guides 1103 and 1103R. Length: 1.10 m.

View product

Plate

Ref: 11036L-1

Angle plate, screwed in at the end of the panel. Enables the door to be mounted in alignment with the track. For panels up to 120 kg.
If using damper(s) M65S / M66S / M67S / M68S:
- for 1 damper: min. width of door: 890 mm;
- for 2 dampers: min. width of door: 940 mm.

View product

Damper closer

Ref: M66

Damper closer system for gentle closing of doors (100 mm). Damper automatically follows door to its closed position. For doors between 20 and 60 Kg.

View product
Ref: M67

Damper closer system for gentle closing of doors (100 mm). Damper automatically follows door to its closed position. For doors between 61 and 81 Kg.

2 dampers recommended for doors 900 mm wide and over.

View product

Synchronization kit

Ref: 11050-2

Synchronization kit for 2 doors of 80 Kg:
- 2 assembled driving pulleys
- Driving angle plate
- Fixing angle plate with spring
- Cable of Ø 1.5 mm. Length 10 m.

View product

Stopper – Doors up to 80 Kg

Ref: 11213S80
- Hydraulic door stopper SAF-STOP. For doors up to 80 Kg
View product
End stop

Ref: 1084
- End stop with rubber buffer.
View product
Angle plate

Ref: 2529
- Reinforced angle plate for wall fixing of track (MA80A), supplied with screws, nuts and washer. Height = 23 mm - Length = 30 mm - Thickness = 30/10
View product
Wall bracket for removable tracks

Ref: 66RDM

Wall bracket for removable tracks in a pocket door configuration. The bracket is fastened at the far end of the cassette and near the opening. Provides easy access to components found in the track (to replace rollers, etc.).

View product
Ceiling bracket for removable tracks

Ref: 66RDP

Ceiling-mounted bracket for removable tracks in a pocket door configuration. The bracket is fastened at the far end of the cassette and near the opening. Provides easy access to components found in the track (to replace rollers, etc.).

View product