TANGO - Sliding-Folding system for partition doors and wardrobe doors | Mantion

Sliding-Folding system TANGO for partition doors and wardrobe doors.

Capacity/Pannel: 40 kg

Thickness / Panel: 16 - 40 mm

Track: Aluminium (SAF)

Movement: Folding/Sliding for wooden doors

Simple, reliable and quick to install!

Folding sliding system for 2 or 4 panels (2 on each side of the opening).
Suitable for wardrobe doors and partition doors.

DESIGN:

No bottom track and minimum gaps.

PRACTICAL:

For 2 panels each 750 mm maximum width.

POLYVALENT:

For partition doors and wardrobe doors, 2 or 2+2 panels.

*Weight

*Epaisseur Panneau

EPD

* Number of cycles

* Fabrication

25 years guarantee

TANGO – Sliding-Folding system for partition doors and wardrobe doors - Image 1

TANGO – Sliding-Folding system for partition doors and wardrobe doors - Image 2

TANGO – Sliding-Folding system for partition doors and wardrobe doors - Image 3

TANGO – Sliding-Folding system for partition doors and wardrobe doors - Image 4

TANGO – Sliding-Folding system for partition doors and wardrobe doors - Image 1

TANGO – Sliding-Folding system for partition doors and wardrobe doors - Image 2

TANGO – Sliding-Folding system for partition doors and wardrobe doors - Image 3

TANGO – Sliding-Folding system for partition doors and wardrobe doors - Image 4

Set TANGO for 2 panels – Track 1,50 m

Ref: TANGO40A-150
Set for 2 panels including:
- 1 anodised aluminium track SAF drilled - L = 1.50 m;
- 1 SAF roller (ball bearings) with plate;
- 1 upper pivot;
- 1 lower pivot;
- 3 hinges 1504C3 (side fixing);
- Screws and mounting instructions.
View product
Set TANGO for 4 panels – Track 1,95 m

Ref: TANGO40A-195
Set for 4 panels including:
- 1 anodised aluminium track SAF drilled - L = 1.50 m;
- 2 SAF rollers (ball bearings) with plate;
- 2 upper pivots;
- 2 lower pivots;
- 6 hinges 1504C3 (side fixing);
- Screws and mounting instructions;
2 panels on each side of the opening (2 + 2).
View product

Anodised aluminium track – 1,95 m

Ref: 13108/195

Anodised aluminium track, 36 x 27 mm crosssection, drilled every 0.44 m. Length = 2 m.

View product
Anodised aluminium track – 3 m

Ref: 13108/300

Anodised aluminium track, 36 x 27 mm crosssection, drilled every 0.44 m. Length = 3 m.

View product

Gear

Ref: TANGO42A
Gear to guide 2 panels including:
- 1 SAF roller (ball bearings) with plate;
- 1 upper pivot;
- 1 lower pivot;
- 3 hinges 1504C3 (side fixing);
- Screws and mounting instructions.
View product

Hinge

Ref: 1504PI
Set of 3 special hinges with ball bearings.

Advantages:
- Holds panels in closed position;
- Eliminates play between panels (fastened to the back of the panels).
This special hinge is designed to replace the hinges in kit 1504C3 (3 for 2 panels and 6 for 4 panels).
The calculation formulas are different: use our SLIDSOFT® calculation software.
View product
“Invisible” flush-mounted hinge

Ref: 1540
“Invisible” flush-mounted hinge. The hinge is hidden inside the panel and does not protrude from its plane.
Advantages :
- 3-dimensional adjustment: depth (X): +/- 2 mm / vertical (Z): +/- 2.5 mm / horizontal (Y): +/- 1 mm ;
- Reversible hinge;
- 23 mm width.
View product

Bracket

Ref: 13013

Angle bracket (sliding) for fastening tracks 13312 and 13108 to the wall. Fastened every 0.44 m.

View product