Our guides for doors

Screw-in guide, adjustable (18 to 42 mm) with two black nylon olives. Diameter = 14 mm. To be fixed on the jambs of the opening.

Screw-in guide, adjustable (35 to 60 mm) with two black nylon olives. Diameter = 25 mm. To be fixed on the jambs of the opening.

• Bottom guide on a hinge for U-profile 25 x 17 (Item Nr 1109)

Polycarbonate lower guide for glass doors with a maximum thickness of 12 mm.

Brushed stainless steel lower guide.

• End guide for track 9050

• End guide for track 9060 and 10500 PAF.

• End guide for track 10600PAF and 9070

Left end guide on galvanized steel plate. 1 guide.

Right guide on galvanized steel plate. 1 guide for door with pass door.

Left guide on galvanized steel plate. 1 guide for door with pass door.

Guide with convex nylon olive.
A = 71 - B = 49 - C = 50 - D = 10
Guide for sliding gates.

• Hal shoe guide in full nylon, screwing type

• Adjustable shoe-guide in cast iron (32 to 70 mm) for heavy doors

• Guide for vertical sealing, with a zytel olive

• Guide for horizontal sealing with a zytel olive Ø 45 mm

• Adjustable guide with a zytel olive Ø 45 mm. Screwing type

• Adjustable guide for horizontal sealing with 2 zytel olives

• Adjustable guide with 2 zytel olives, screwing type

• Zytel olive Ø 46 mm, Height : 45 mm, for an axle of 16 mm Ø

Universal adjustable lower guide (cut-to-length) in transparent polycarbonate for equipping two doors.
2 installation options: 
- without grooves (1 guide on each side of the door);
- with 5 x 15 mm grooves.

• Half shoe guide in cast iron - Sealing type.

• Adjustable shoe-guide in cast iron(21 to 50 mm) for standard doors

• Half shoe guide in cast iron

• Bottom guide with a nylon olive (monted on roller cages), on a reinforced plate, screwing type. For U-profile 50 x 60 mm

• Bottom guide with a nylon olive (mounted on roller cages), without plate. For U-profile 25 x 17 mm

• Bottom guide with a brass olive (mounted on roller cages), without plate. For U-profile 30 x 30 mm

• Guide with 1 brass olive on screw plate for 30 x 30 U-profile

Guide with 1 nylon olive on screw plate for 25 x 18 U-profile 1109A.

• Polyamide guide - Screwing type for channel of 6x18 mm.

Bottom guide in polyamide.

• Adjustable guide, idem 1059 mounted on a threaded rod

• Guide with 1 brass olive on stainless steel plate to be screwed in for 30x30 U-profile

Lower guide on plate to be screwed in. For 30x30 U-profile (item no. 1110).

Stainless steel (304L) plate-mounted lower guide, to be screwed in, for track (GC6100) (OPENTEC FW75).

• Polyamide guide - Screwing type for channel of 6x18 mm

• Guide with olive Nylon for U 25x17 mm

• Guide for U-profile 30 x 30 mm

• White nylon slider to be screwed in - 100 x 25 x 25 mm

• Nylon guide, crewing type, for U-profile 30 x 30 mm

• Bottom guide with a nylon olive, without plate. For U-profile 25 x 17 mm

Bottom guide, for doors for 16 to 45 mm thickness.

Lower guide reinforced with a 64-mm-diameter steel roller (mounted on ball bearings), on a screw-in plate (position adjustable thanks to slotted holes) for UPE 80.

Zinc-plated single roller guide, for gates on rails on the ground. Diameter: 50 MM. To be used with the U 1115 profile.

• Adjustable guide (14 to 30 mm) with screw and S6 plug

• Grey plastic runner with screw and S6 plug for 25 x 17 and 30 x 30 U-profiles and 4 mm flat iron

• Grey plastic screw-in runner for 25 x 17 mm and 30 x 30 mm U-profiles and 4 mm flat iron

• Adjustable guide with 2 nylon olives on a stainless steel plate for U 25x18